Manual Universal Gauge (Plucometer) TC-101M)

Manual Universal Gauge (Plucometer) TC-101M

Compliance standards

  • EN ISO 10545 -2, IS 13630 (Part 1)

Applications

  • For determining the dimensional characteristic of ceramic tiles

Details

Entire setup comprises of two different instruments as per following.

  • Tiles surface flatness and warpage measurement apparatus
  • Tiles straightness of sides and Tiles rectangularity (Orthogonality) test apparatus

Quick Inquiry

Key Features

  • One single instrument can make all the measurements – Rectangularity (Orthogonality), Flatness, Warpage & Straightness of sides as suggested by the standard.
  • 06 different digital dial gauges to offer precise and accurate measurement results with very little deviation factor.
  • Simple, easy and less time consuming dial gauge fixing system.
  • All six readings get displayed on individual Digital Gauge (Comparator) screen.
  • An operator can make easy & effortless comparison between each of the generated readings.
  • Individual Tare facility is available for each digital gauge.
  • Back light facility to easily read and view the display even in sunlight.
  • Direct Digital reading in plus or minus factor.
  • Accuracy : ± 0.01 mm (1/100 mm)
  • Can measure : 100 x 100 to 600 x 600 mm tile sizes
  • Supplied complete with locating studs and Allen keys
  • Aluminum Ergal hard anodized ground working plate
  • Stainless Steel/Mild Steel Supporting structure
  • System can also be supplied with dedicated software part for data acquisition and analysis purpose

Selection Guide

Model No Accommodates Tile size
TC-101-M60 600 X 600 MM Tiles
TC-101-M80 800 X 800 MM Tiles
TC-101-M100 1000 X 1000 MM Tiles
TC-101-M120 1200 X 1200 MM Tiles

M : Manual operation

Tiles Surface Flatness
Apparatus

  • Can accommodate: 100 x 100mm to 600 x 600mm tiles sizes
  • Can measure surface flatness and warpage of test
    samples
  • Material of Construction : Mild steel
  • Paint: Powder coating
  • No of Dial gauges: 03 Nos
  • Dial gauge range: 0 – 10 mm
  • Dial gauge accuracy: ±0.1 mm
  • Calibrating plates of tailor made sizes should be ordered separately. (Optional)
  • Supplied complete with Locating studs, Allen keys and magnetic stands

Tiles Straightness of sides and rectangularity apparatus

  • Can accommodate: 100 x 100mm to 600 x 600mm tiles sizes
  • Can measures straightness of sides and orthogonality of adjacent sides
  • Material of Construction: Mild steel
  • Paint: Powder coating
  • No of Dial gauges: 02 Nos
  • Dial gauge range: 0 – 10 mm
  • Dial gauge accuracy: ±0.1 mm
  • Calibrating plates of tailor made sizes should be ordered separately. (Optional)
  • Supplied complete with Locating studs, Allen keys and magnetic stands